Mads Fagerlund
64a399597a
Drops the mbp (Asahi) target and everything that existed only to serve
two machines at once:
- apple-silicon input, firmware/ (87M of Mac Wi-Fi/BT blobs), hosts/mbp/
- the mkHost helper and the common-vs-host-module split, merged into one
`pc` module
- the osConfig.networking.hostName conditional that generated
hypr/monitors.conf per host -- the monitor layout, workspace placement
and panel float rule are now stated once, inline in hyprland.conf
- the aarch64 nixbuild.net builder and the aarch64 devShell
- Mac-only hyprland bits: the apple-spi-keyboard device block and the
touchpad input block
hosts/pc/hardware-configuration.nix moves to the repo root: with one
machine there is no host to namespace it under. The flake output stays
named `pc` so it matches networking.hostName, which means plain
`nixos-rebuild switch --flake ~/nixos` resolves it with no #target.
eww goes too. It only ever drew a battery popup (SUPER+R), and a battery
readout on a desktop with no battery is nothing.
Also fixes the services.logind.suspendKey/hibernateKey/lidSwitch rename
that eval has been warning about; the rendered logind.conf keeps the same
three Handle*=ignore directives.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
48 lines
1.6 KiB
Markdown
48 lines
1.6 KiB
Markdown
# nixos
|
|
|
|
One flake, one machine: x86_64 UEFI desktop. Hyprland + greetd autologin,
|
|
Zen+Tridactyl, neovim, zsh+starship.
|
|
|
|
```
|
|
flake.nix all config (the `pc` system module + the `home` module)
|
|
hardware-configuration.nix generic x86_64 UEFI profile — mounts by label, as-is
|
|
config/ raw configs: hypr fuzzel nvim
|
|
```
|
|
|
|
Set `time.timeZone` in the `pc` module. Monitors, workspace placement and
|
|
keybinds live in `config/hypr/hyprland.conf`.
|
|
|
|
## Apply
|
|
|
|
The flake output is named after the hostname, so no `#target` is needed:
|
|
|
|
```sh
|
|
sudo nixos-rebuild switch --flake ~/nixos
|
|
nix flake update && sudo nixos-rebuild switch --flake ~/nixos # update
|
|
```
|
|
Roll back = pick an older generation at boot.
|
|
|
|
## Install
|
|
|
|
No hardware generation needed — `hardware-configuration.nix` is generic and
|
|
mounts by the labels below. Boot the NixOS ISO, `sudo -i`:
|
|
|
|
```sh
|
|
parted /dev/nvme0n1 -- mklabel gpt \
|
|
mkpart ESP fat32 1MiB 512MiB set 1 esp on \
|
|
mkpart primary 512MiB 100%
|
|
mkfs.fat -F32 -n NIXBOOT /dev/nvme0n1p1
|
|
mkfs.ext4 -L NIXROOT /dev/nvme0n1p2
|
|
mount /dev/disk/by-label/NIXROOT /mnt && mkdir -p /mnt/boot
|
|
mount /dev/disk/by-label/NIXBOOT /mnt/boot
|
|
git clone <private-remote> /mnt/root/nixos && cd /mnt/root/nixos
|
|
nixos-install --flake .#pc && reboot
|
|
```
|
|
Exotic storage controller won't boot? Add its module to
|
|
`availableKernelModules` in `hardware-configuration.nix`
|
|
(`nixos-generate-config --show-hardware-config` lists it).
|
|
|
|
## After first boot
|
|
|
|
`passwd` (ships `initialPassword = "changeme"`). If you land on a tty instead
|
|
of Hyprland, change greetd's `uwsm start hyprland` → `Hyprland`.
|